The Phoenix Nanotom® M is a nanofocus X-ray CT system for scientific and industrial computed tomography (microCT and nanoCT®) and 3D metrology. The system realizes a unique spatial and contrast resolution on a wide sample …

medium mechanical dimensions, medium sampling volume, high image resolution, medium power consumption, low number of frames per second

-

P03 is the microfocus small- and wide-angle X-ray scattering beamline (MiNaXS) at PETRA III. This beamline exploits the excellent photon beam properties of the low emittance source PETRA III to provide micro- and nanofocused beams …

The imaging beamline (IBL) is dedicated to micro- and nanotomography at energies between 5 keV and 50 keV. The flexible design of the experimental stations allows for the investigation of samples with diameters ranging seamlessly …

he second experimental hutch contains the micro tomography setup of P05. At a sample distance of 87 m from the source, the horizontal full width at half maximum of the beam is 5.6 mm which …

The nanotomography endstation in the experimental hutch 1, designed to allow 3D resolutions of below 100 nm, is currently under construction. As X-ray optics we will use compound refractive lenses (CRLs), made from SU-8 polymer …

A Talos F200i Transmission Electron Microscope. It has an XFEG with alignments for both 80kv and 200kV, and is capable of TEM or STEM imaging. The microscope has the following capabilities:

• CETA 16M camera (4kx4k) …

This Scanning Electron Microscope is operated at Hereon.